Contents: 12,5 liter
Property profile
- For deep hydrophobization of concrete and reinforced concrete in buildings
- For old, carbonated concrete surfaces as well as lime and cement renders
- For use outdoors
- Improved resistance to frost/de-icing salt
- Water repelling
- Water vapour diffusion-open
- Good penetration capacity
- Can be easily and exactly applied without any loss
- Early rain tight approx. 60 minutes after application
- UV resistant
- Alkali resistant
- Excellent long-term effect
Directions
Working temperature: +10 °C to +25 °C
Apply the impregnation agent with a lambskin roller/wide brush lengthwise and crosswise or spray on with airless spraying equipment.
Protect freshly impregnated surfaces from driving rain, wind, sunshine and condensation. Remove excess impregnation agent within 1 hour with V 101 Thinner.
Application rate
Depending on porosity: Approx. 0.2 - 0.5 l/m² Impregnation agent requirements for calculation and tender should be determined on a sufficiently large trial area (1-2 m²). The effectiveness of the impregnation can also be checked on this surface.
