Remmers Funcosil FC cream (0,75 liter)

Funcosil FC 0.75L Remmers Funcosil FC cream (0,75 liter) Certificaat Remmers Funcosil FC cream (0,75 liter) Remmers Funcosil FC cream (0,75 liter) Funcosil FC Review 1 Funcosil FC Review 2 Funcosil FC Review 3
Funcosil FC 0.75L Remmers Funcosil FC cream (0,75 liter) Certificaat Remmers Funcosil FC cream (0,75 liter) Remmers Funcosil FC cream (0,75 liter) Funcosil FC Review 1 Funcosil FC Review 2 Funcosil FC Review 3
Remmers Funcosil FC cream (0,75 liter)
0 Reviews | Add review
Funcosil FC is a professional impregnation cream on a silane/siloxane base. Due to the extremely high active ingredient content, this product grants a proven effect of over 15 years.

Product number

071101

Weight   

1,000 KG

Shipping costs

€ 0,00

Default delivery time

From stock, 1-7 working days

EAN

4004707053983

€ 42,50
Price per piece
Quantity: 
Order
 
Wishlist

Do you have a question about this product?

Ask us your question

Contents: 0,75 liter (3,5 - 5 m2)

Proven effect Funcosil FC: >15 year.


Property profile
  • For hydrophobizing impregnation of porous, cementitious building materials such as brick, clinker, sand-lime brick, render, natural stone and fibrated cement. Rain tight: approx. 30 min. after application. Not sensitive to frost. Not suitable for dense building materials such as marble, granite or cleaving tiles.

Directions
Funcosil FC is applied by roller (long-haired lambskin roller), brush or airless equipment. Depending on the absorbency of the substrate, application rates of up to 0.2 l/m² can be applied in one working operation even on vertical surfaces and ceilings without a loss of material. Working temperature: Hydrophobizing impregnation is preferably carried out at temperatures between +5 °C and 25 °C. Sun awnings can be used to prevent surfaces from heating too strongly. At temperatures below 10 °C, evaporation of the carrier and formation of the active ingredient may be considerably delayed. Rain tight: At the earliest after 60 minutes or after the cream has been completely absorbed.

Application rate
Depending on porosity approx. 0.15 to 0.20 l/m². Impregnation agent requirements for calculation and tender should be determined on a sufficiently large trial area (1- 2 m²). The effectiveness of the impregnation can also be checked on this surface.
 

Order by:

Add review

No reviews found.

Ask a question about this product

Fields marked with a * are mandatory

Your question has been sent! Thank you.

We will provide you with an answer as soon as possible.