Induline GW-310 wood - protection extra black RAL9005 (20 liter)

Note: This article has been replaced by Induline T-670. This product Induline GW-310 is no longer available for ordering. Link to new product: Induline T-670 Plus

Contents and application rate Induline GW-310 (20 liter)

• 20L - 100m²

The application rate is depending on the porosity of the wood and based on an average of 200ml/m² per layer. Remmers recommends applying 2 layers of Inducline GW-310 for optimal protection. 

Property profile Induline GW-310

• Color: Ral 9005
• Ready to apply by dipping, low pressure spraying or applying with a roller/brush
• Excellent flow characteristics on untreated wood
• Outstanding (wet) adhesion
• Protects wood from moisture and provides effective protection against blue stain fungi
• Reduces the risk of rot when used in conjunction with constructive wood protection measures
• Increased solids content provides protection against nesting wasps
• Protective film against mould and algae
• Water-based: does not give off any unpleasant odours and tools can be cleaned with water
• Quick drying: 2 coats can be applied in one day
• Long-term protection with uniform weathering

Application Induline GW-310

• For use on exterior wood
• Wood which is not in ground contact, in accordance with DIN EN 335-1, use classes 2 and 3
• Dimensionally stable wood building elements (when used as a primer only): e.g. windows and doors
• Wood building elements with limited dimensional stability, e.g. folding shutters, matchboarding, summerhouses
• Wood building elements with no dimensional stability: e.g. fences, framework, carports, planking
• Primer, intermediate and finishing coats

Directions for application 

The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Dimensionally stable wood building elements: wood moisture content 11-18%