Polyurethane Concrete & Floor Paint Anthracite, RAL7016, (5 kg)

PU Concrete & Floor Paint Anthracite – RAL 7016 (5 kg)

Product Description

This PU Concrete & Floor Paint in anthracite (RAL 7016) is a high-performance, polyurethane-enhanced floor coating that provides a durable and sleek finish for concrete and cement floors. Acting as a bonding primer, finishing coat and protective sealer all in one, this product delivers long-lasting protection with a single system. It is suitable for floors subjected to regular use in workshops, storage areas and covered outdoor spaces, provided they are not exposed to continuous water contact.

The coating creates a hard-wearing, low-maintenance surface that protects against dirt, stains and common chemicals, while giving the floor a professional, uniform appearance.

Key Features

• All-in-one solution: primer, topcoat and sealer combined

• Durable and abrasion-resistant: suitable for daily use and household chemicals

• Easy to apply: smooth application and fast drying times

• Professional finish: deep anthracite colour that evens out minor colour variations

• Long-lasting protection: extends the service life of concrete and cement floors

Technical Specifications

• Colour: Anthracite (RAL 7016)

• Packaging: 5 kg

• Average coverage: approx. 160 ml per m² per coat

• Recommended coats: minimum of 2

• Drying times (20 °C / 65% RH):

  • Dust-dry: approx. 2 hours

  • Recoatable: approx. 12 hours

  • Walk-on dry: approx. 24 hours

  • Fully loadable: after approx. 7 days

Suitable Applications

• Concrete floors and cement screeds

• Cement-bonded boards

• Storage areas, workshops and commercial spaces

• Covered terraces and other sheltered outdoor floors

Not suitable for:

• Areas with permanent water exposure

• Heavy traffic such as cars or other vehicles

Application & Processing

Surface Preparation

• Ensure the surface is clean, dry, solid and free from grease and dust

• Remove loose particles and repair irregularities where necessary

Application

• Do not apply at temperatures below +8 °C

• Stir thoroughly before use

• Apply using a roller, brush or airless spray equipment

• Apply at least two coats for optimal protection

After Application

• Avoid standing water during curing

• Allow 7 days before full mechanical loading

Batch Consistency

For a uniform colour result, it is recommended to use products from the same batch on a single surface. The images shown are for illustrative purposes only. Actual colors may vary depending on the surface and your monitor settings.

Why Choose This PU Concrete & Floor Paint?

• Time-saving thanks to its multifunctional formulation

• Professional-grade finish with minimal effort

• High resistance to wear and chemical exposure

• Suitable for indoor use and covered outdoor areas

• Durable, low-maintenance floor protection

Overview Remmers Floor Products