Induline T-670, if your garden wood really needs to be BLACK
Induline T-670 Plus – Black 3-in-1 Exterior Wood Coating
Induline T-670 Plus is a professional, water-based and opaque 3-in-1 exterior wood coating from Remmers. It combines primer, intermediate coat and topcoat in one product and provides a deep, elegant black finish for exterior timber.
Ideal for garden houses, timber cladding, fences, carports, wooden façades, rabbet boards, weatherboards and other exterior wooden structures.
Deep Black Protection for Exterior Wood
Black exterior wood has become increasingly popular for modern garden buildings, timber façades, fences and outdoor structures. Remmers Induline T-670 Plus combines this contemporary appearance with the performance of a professional exterior wood coating.
The coating is designed for exterior timber and provides a durable, opaque finish while helping protect the coating system against moisture, weathering, fungi and algae.
One of the key advantages is the 3-in-1 system: Induline T-670 Plus can function as the primer, intermediate coat and final topcoat. This makes the coating system particularly efficient compared with systems requiring several different products.
Key Benefits of Induline T-670 Plus
Deep Black Finish
Creates a strong, deep black and opaque finish for a modern architectural appearance on exterior timber.
3-in-1 Wood Coating
Primer, intermediate coat and topcoat in one product, making the coating system efficient and straightforward to apply.
Water-Based Formula
A water-based formulation with mild odour. Application tools can be cleaned with water after use.
Fast Drying
Under suitable conditions, two coats can be applied in one day. The second coat can generally be applied after approximately 2–3 hours.
Excellent Flow and Adhesion
Provides very good flow on untreated timber and excellent wet adhesion for an even and professional finish.
Protection Against Fungi and Algae
The coating contains a film preservative to help protect the coating film against fungal and algae infestation.
Wasp Protection
The high solids content provides physical protection against wasps gnawing into the coating film.
Durable Weathering
Designed for durable exterior use with uniform weathering and resistance to flaking.
Where Can Induline T-670 Plus Be Used?
Induline T-670 Plus is designed for exterior wooden surfaces and timber structures. Typical applications include:
Create a modern deep-black finish while protecting exterior timber.
Suitable for wooden façades, weatherboards and exterior wall cladding.
Ideal for opaque black finishes on garden fences and boundary structures.
Suitable for protecting and finishing exterior wooden carports.
Creates a uniform, opaque black finish on exterior timber profiles.
Suitable for many non-dimensionally stable and limited dimensionally stable wooden components.
Suitable for Different Types of Exterior Wood
Induline T-670 Plus can be used on a wide range of exterior timber, depending on the specific properties and condition of the substrate. The final adhesion, coverage and durability depend on the wood species, surface preparation and application conditions.
- Softwood: for example spruce, pine, Douglas fir and larch
- Hardwood: suitable hardwood species such as oak, subject to proper preparation
- Exterior timber profiles: including weatherboards, rabbet boards and timber cladding
- Modified timber: suitable for selected applications, with a test area recommended beforehand
Resin-rich timber and wood species containing water-soluble substances may require particular attention when using water-based coatings. Always carry out a test application when working with an unfamiliar or specially treated timber substrate.
What Does 3-in-1 Mean?
Induline T-670 Plus is designed as a complete 3-in-1 exterior wood coating system. Instead of requiring a separate primer, intermediate coating and topcoat, the same product can be used for the different coating stages.
Primer
The first coat forms the foundation of the coating system.
Intermediate Coat
A further coat builds up coverage, protection and film thickness.
Topcoat
The final coat creates the uniform deep-black exterior finish.
How to Apply Induline T-670 Plus
Good surface preparation is essential for a durable exterior wood coating. The substrate should be clean, dry, free from dust, grease and loose or separating material.
Step 1 – Prepare the Timber
Remove dirt, dust, grease and poorly adhering old coatings. Weathered timber should be prepared until a sound and suitable substrate is obtained.
Step 2 – Stir the Product
Stir Induline T-670 Plus thoroughly before use. The product should also be mixed again after longer work interruptions.
Step 3 – Apply the First Coat
Apply a uniform first coat using a suitable brush, spray equipment or other appropriate application method.
Step 4 – Apply the Second Coat
Under suitable conditions, the second coat can generally be applied after approximately 2–3 hours. If the coating has dried overnight, Remmers recommends intermediate sanding before applying the next coat.
Step 5 – Additional Coat if Required
A third coat may be appropriate for particularly exposed surfaces or certain wood species. Very dense or planed timber may also require additional coating material because of its lower absorption.
Application by Brush, Roller or Spray
Brush
Ideal for smaller surfaces, edges, details and areas that are difficult to reach with spray equipment.
Spray Application
Suitable spray equipment can be used for efficient application on larger timber surfaces and professional coating projects.
Dipping / Flow Coating
Remmers also specifies Induline T-670 Plus for application methods such as dipping and flow coating in professional coating processes.
Coverage and Available Sizes
The specified consumption of Induline T-670 Plus is approximately 80–120 ml per m² per coat. At least two coats are required. Actual consumption depends on the wood species, surface texture, absorbency and application method.
| Pack Size | Approximate Coverage* |
|---|---|
| 2.5 litres | approx. 21–31 m² per coat |
| 5 litres | approx. 42–63 m² per coat |
| 20 litres | approx. 167–250 m² per coat |
* Calculated from the specified consumption of 80–120 ml/m² per coat. At least two coats are required, so the total area covered by one container will be lower when the complete two-coat system is taken into account. Actual coverage depends on the substrate and application method.
Deep Black Exterior Wood Finish
Induline T-670 Plus is available in a Deep Black finish, providing an opaque and contemporary appearance for exterior timber.
Remmers also offers corresponding base products and colour options for specific professional applications. Please check availability before ordering special colours.
Important Application Information
Always carry out a test application first. This is particularly important when coating unfamiliar, modified, thermally treated or previously coated timber.
Wood species such as oak and other timber containing water-soluble extractives can cause discolouration when coated with water-based products. Resin-rich softwoods may also require additional preparation.
Low temperatures, high humidity and insufficient ventilation can significantly extend drying times.
Why Choose Induline T-670 Plus?
- Professional Remmers exterior wood coating for outdoor timber
- 3-in-1 system: primer, intermediate coat and topcoat in one product
- Deep black opaque finish for a contemporary architectural appearance
- Water-based formulation with easy water cleaning of tools
- Fast drying – two coats can be applied in one day under suitable conditions
- Excellent adhesion and flow on untreated timber
- Film preservation against fungal and algae infestation
- Durable weathering with resistance to flaking
- Suitable for a wide range of exterior wooden structures
Frequently Asked Questions About Induline T-670 Plus
Is Induline T-670 Plus a wood stain or paint?
Induline T-670 Plus is a water-based, opaque exterior wood coating. Unlike a transparent wood stain, it provides a covering colour finish. Remmers describes the product as a 3-in-1 coating system.
How many coats of Induline T-670 Plus are required?
At least two coats are required. Depending on the exposure, substrate and wood species, an additional coat may be appropriate.
How long does Induline T-670 Plus take to dry?
Under suitable conditions, the next coat can generally be applied after approximately 2–3 hours. Temperature, humidity, ventilation and coating thickness affect the drying time.
Can I use Induline T-670 Plus on a garden house?
Yes. Garden houses are among the intended applications for the product. It can also be used for timber cladding, fences, carports and other exterior wooden structures.
Is Induline T-670 Plus suitable for black exterior wood?
Yes. The Deep Black finish provides an opaque black appearance specifically suited to modern exterior timber projects.
Can Induline T-670 Plus be used on wooden fences?
Yes. The coating is suitable for many exterior wooden structures, including suitable timber fences and other non-dimensionally stable or limited dimensionally stable components.
Is Induline T-670 Plus water-based?
Yes. Induline T-670 Plus is a water-based exterior wood coating. This also makes cleaning application equipment with water possible after use.
Buy Remmers Induline T-670 Plus
Choose a professional Remmers exterior wood coating for a durable, deep-black finish on your garden house, timber cladding, fence, carport or other outdoor wooden structure.
Induline T-670 Plus – professional 3-in-1 protection with a deep black exterior finish.
Product properties and application recommendations are based on the available Remmers product information. Always consult the latest technical data sheet and safety data sheet before use.
